+ Toggle navigation
Sense Cables

Sense Cables

For Water / Acid Leak Detection & Location

Water Sense Cables

FG-EC - cable détecteur de fuites d'eau

Water Sense Cables

FG-EC

The FG-EC digital and addressable sense cable (with microprocessor and a high visibility LED embedded) detects and pin-points the location of water and base liquids leaks at any point along its length. The FG-EC is insensitive to dust and metal particle contaminations, and, what’s more, from 1st July 2019, all FG-EC cables are made in low smoke zero halogen (LSZH or LZ0H) materials, it emits limited smoke and no halogen when exposed to high sources of heat.

FG-ECS - cable détecteur de fuites d'eau

Water Sense Cables

FG-ECS

The FG-ECS works in two ways: When connected to the locating unit it detects and pin-points the position of the leak ~or~ when connected to the non-locating unit it detects the leak without pin-point mapping. To one end is 11.5 ft of TTK BUS 8723 jumper cable, whilst to the other there is an end termination enabling quick connection. From 1st July 2019, all FG-ECS cables are made in low smoke zero halogen (LSZH or LZ0H) materials, it emits limited smoke and no halogen when exposed to high sources of heat.

FG-ECX - cable détecteur de fuites d'eau

Water Sense Cables

FG-ECX

The FG-ECX sense cable is analog and designed to be connected to the FG-ALS8, FG-ALS4 and FG-A units. This cable detects and pinpoints the location of leaks when it is connected to the locating units; and detects leaks without specific mapping when connected to the non-locating unit. The FG-ECX sense cable is made with special Low Smoke Zero Halogen materials (LSZH or LS0H).

FG-ECB

Water Sense Cables

FG-ECB

The FG-ECB sense cable is specially designed for pipes solution. It is to be belt on the bottom of the suspended pipes. An external polyethylene based braided jacket keeps water around the cable thus assures an efficient detection. The FG-ECB sense cable is a non-absorbent design that can be reused after leaks.

Water Point Sensor

FG-ECP - détection fuites d'eau

Water Point Sensor

FG-ECP

The FG-ECP point sensor is available in three models (U-shape, L-shape and customized) to suit different environments and has been developed to provide quick detection of water leaks.

FG-ECP-M

Water Point Sensor

FG-ECP-M

FG-ECP-M is designed and ideally suited for high humidity environments, with its ingenious design of two probes, it offers particularly good resistance to the false alarms caused by the humidity.

Acid Sense Cables

FG-AC - cable détecteur de fuites d'acide

Acid Sense Cables

FG-AC

The FG-AC cable detects and pinpoints the location of water, acid and corrosive chemical liquid leaks at any point along its length. It is made of a corrosion and abrasion resistant material that can be reused after cleaning. Being digital and addressable (microprocessor embedded) the FG-AC cable is insensitive to dust and metal particle contaminations, and, what’s more, each cable has high visibility LEDs to provide quick identification of the cable status.

Cable FG-ACS détecteur de fuites

Acid Sense Cables

FG-ACS

The FG-ACS sense cable detects and pin-points leak location when connected to the locating units, or detects without specific mapping when connected to the non-locating unit. It has a length of 11.5 ft of TTK BUS 8723 jumper cable to one end and an end termination to the other allowing quick connection.

FG-ACX - cable détecteur de fuites d'acide

Acid Sense Cables

FG-ACX

The FG-ACX sense cable is an analog sense cable, compatible with FG-ALS8, FG-ALS4 and FG-A units. This cable can detect and pinpoint leak location when connected to the locating units, and detects leaks without precise location mapping when connected to the non-locating unit.

Sign up with your business email address to receive our newsletter featuring our newest products, project case studies, useful information about water and fuel leak detection, and much more!